AC Servicing — The Real Reason Your AC Stopped Performing the Way It Should
Most people call for AC servicing when something goes wrong — when the room is not cooling, when a strange sound starts or when the electricity bill suddenly shoots up without explanation.
But here is what most people do not know: by the time your AC shows a visible problem, the damage inside has already been building for months.
This is the story of what actually happens inside an air conditioning unit over time — and why scheduled AC servicing is not a cost but a protection.
What Happens Inside Your AC That You Cannot See
Your AC runs silently for hours every day. You set the temperature, the machine works and you expect cool air. Simple enough.
But inside the unit, several things are happening simultaneously — and all of them work against the machine's efficiency over time.
The evaporator coil collects a film. Every cubic meter of air that passes through your AC carries invisible particles — dust, pollen, skin cells, cooking particles and moisture. A thin film builds on the evaporator coil surface with every operating hour. This film is not thick enough to see but it is thick enough to matter. Heat transfer across a filmed coil is measurably less efficient than across a clean one.
The condensate drain slowly narrows. Your AC removes moisture from the air as it cools. This moisture collects in a drain pan and exits through a drain pipe. Algae, mold and accumulated debris narrow this drain over months. When the drain partially or fully blocks, water backs up into the unit — causing water to drip from the indoor unit, odors from the stagnant water and eventually damage to the unit's internal components.
The refrigerant system develops micro-stresses. Refrigerant connections, pipe joints and valve fittings experience repeated thermal expansion and contraction with every AC cycle. Over time, these micro-stresses can develop into slow leaks — refrigerant levels drop gradually and cooling performance declines in a way that most users attribute to everything except the actual cause.
The outdoor unit accumulates a heat barrier. The outdoor condenser unit rejects the heat your AC removes from your room. When the condenser fins become coated with dust, pollution and debris, the heat rejection process becomes inefficient — the compressor works harder, runs hotter and uses significantly more electricity while delivering less cooling.
The Real Cost of Skipping AC Servicing
Here is a calculation that most AC owners never make.
A 1.5-ton AC running 8 hours daily at 100% efficiency uses approximately 1.2 units of electricity per hour. The same AC with a filmed coil and partially blocked drain may use 1.5 to 1.8 units for the same output — or fail to reach the output at all.
Over a single month, that difference is 72 to 144 units of electricity. At current rates, that is ৳700 to ৳1,400 in additional electricity cost — every month — from a machine that is simply overdue for servicing.
A professional AC servicing costs a fraction of this monthly waste. The mathematics of skipping servicing simply do not add up in the user's favor.
Beyond electricity costs, there is the compressor. The compressor is the most expensive single component in any AC system. A compressor that runs hot due to an inefficient condenser, or runs long due to a filmed evaporator reducing cooling speed, wears significantly faster than a compressor in a properly maintained system. Compressor replacement or repair is expensive. Regular servicing is not.
What Complete AC Servicing Actually Involves
There is a significant difference between what most people think AC servicing means and what a thorough service actually includes.
Filter cleaning is what most people think of as servicing. It takes five minutes, removes the visible layer of dust from the filter panel and changes nothing about the performance issues described above. It is necessary but it is the beginning of servicing, not the end.
Complete AC servicing covers the full system:
Evaporator Coil Deep Clean
The indoor unit is opened and the evaporator coil — the heat exchange surface that filter cleaning never reaches — is cleaned using appropriate coil cleaner. The cleaning dissolves the film that has built on the coil surface and restores full heat transfer capability. The difference in cooling speed after coil cleaning is typically immediate and noticeable.
Condensate Drain Clearing and Treatment
The drain pan is cleaned of algae and debris accumulation. The drain pipe is cleared to confirm free flow. Anti-algae treatment is applied to the drain pan to slow future biological growth. This eliminates the odor associated with stagnant drain pan water and prevents the water backup that damages internal components.
Blower Fan and Housing Clean
The blower wheel — the component that draws air across the evaporator and pushes it into the room — accumulates a dense layer of dust on its blades over time. This reduces airflow and creates the uneven air distribution that makes some parts of the room cooler than others. The blower is cleaned to restore full and even airflow.
Outdoor Condenser Cleaning
The outdoor unit's condenser fins are cleaned using appropriate technique — removing the dust and debris layer that has been reducing heat rejection efficiency. After condenser cleaning, the compressor operating temperature drops and the electricity consumption for the same cooling output decreases measurably.
Refrigerant Pressure Check
System refrigerant pressure is measured and recorded. If pressure is below the manufacturer's specification for the unit, the cause is investigated — a system that is low on refrigerant has a leak that must be found and repaired before any refrigerant is added. Simply topping up refrigerant without finding the leak results in the same pressure loss within weeks.
Electrical Connection Inspection
All accessible electrical connections — at the indoor unit control board and the outdoor unit terminals — are inspected for corrosion, loose connections and any sign of heat damage. Electrical connection issues cause intermittent faults and safety risks that refrigerant and cleaning attention alone would not find.
Signs Your AC Needs Servicing Right Now
Not all AC problems announce themselves dramatically. These are the signs that servicing is overdue:
The room takes longer to cool than it used to. If you remember the AC reaching your set temperature in 15 minutes when it was new and it now takes 40 minutes, the coil or refrigerant system needs attention.
Your electricity bill has increased without explanation. An AC that is working harder than it should shows up in your bill before it shows up in any other way.
There is a musty or stale smell when the AC first starts. This smell comes from biological growth — mold or algae — in the drain pan or on the evaporator coil surface. It is not a harmless smell. It is particles from that growth being circulated into your room.
Water is dripping from the indoor unit. A blocked condensate drain is backing up. The water will damage the unit's internal components if the blockage is not cleared promptly.
The outdoor unit runs louder or hotter than normal. A compressor working against an inefficient condenser runs hot and loud. This is early warning of compressor stress that, if continued, leads to expensive repair.
The AC switches off before reaching the set temperature. The thermostat is reading room temperature correctly but the AC cannot achieve it. Filmed evaporator, low refrigerant or a blower issue are the typical causes.
How Often Should AC Servicing Be Done?
The answer depends on your usage pattern and environment.
For air conditioners running daily in Dhaka's urban environment — where dust levels, pollution and humidity are consistently high — every 6 months is the appropriate servicing interval.
For AC units near cooking areas, in rooms with high occupancy or in apartments near active construction — every 4 months.
For new AC units in their first year — one service at 6 months to address the installation-phase dust that accumulates in every new unit before the first cleaning.
The 6-month interval is not arbitrary. It is based on the rate at which coil contamination, drain biological growth and condenser dust accumulation reach levels that measurably affect performance in Bangladesh's climate and urban air quality.
Our AC Servicing — What You Can Expect
When you book our AC servicing, our technician arrives at your home, office or building at the scheduled time with the tools and cleaning materials for the complete service.
Before beginning, we explain what the service includes and what we find during the initial inspection. You are never surprised by what we do or recommend.
After the service, we run a performance test — measuring the air temperature output from the indoor unit and confirming the outdoor unit is operating within normal parameters. You can see the difference before our technician leaves.
Our service comes with a 10-day service guarantee. If any fault related to our work appears within 10 days of the service, we return and address it at no additional charge.
Why choose our AC Servicing in Shyamoli,Dhaka
A young family near Ring Road in Shyamoli had a 1.5-ton AC in their infant's bedroom — the AC ran throughout the night to maintain a comfortable sleeping temperature for their 8-month-old. The parents were specifically concerned about the air quality in the infant's room during overnight AC operation. When our technician arrived at their Ring Road building, the indoor unit inspection found mild mold development on the lower portion of the evaporator coil — the section that stays damp longest after the AC shuts off. This mold was being circulated into the infant's sleeping environment during every AC operation. Full servicing with anti-mold coil treatment was completed. The coil was cleaned and anti-microbial treatment was applied to inhibit future mold establishment. The parents gave us a five-star review and mentioned that the infant air quality concern had been their specific reason for booking — and the discovery of actual mold on the coil had confirmed their instinct to investigate.
Our Other AC Services
AC Jet Wash — Deep Clean for Better Cooling
AC Foam Wash — Quick & Effective Deep Clean
AC Gas Refill — Leak Test First, Then Refill
AC Installation — Done Right, First Time
AC Master Servicing — Complete AC Care
AC Leak Repair — Permanent Fix
Service Pricing
Price varies by AC ton capacity and unit type — split, cassette or window.