AC Gas Refill — Leak Test First, Then Refill in Demra, Dhaka

5.0
0 Reviews
AC Gas Refill — Leak Test First, Then Refill

Overview of AC Gas Refill — Leak Test First, Then Refill in Demra

Your AC is running but the room is not getting cold? The most common reason is low refrigerant gas. But before we refill anything, we make sure the gas will actually stay — because adding gas without checking for leaks is just wasting your money.

How We Do It — Step by Step

Most technicians just refill the gas and leave. We do it differently.

✅ Step 1 — Full AC Inspection

Before touching the gas, we inspect your entire AC — indoor unit, outdoor unit, pipes and joints.

✅ Step 2 — Leak Test with Soap Foam

We apply soap foam on every pipe joint and connection point. If there is a leak, bubbles will appear — we find it and fix it first. No leak test, no gas refill — that's our rule.

✅ Step 3 — Pressure Check

We use a pressure gauge to check the current gas level and confirm how much needs to be refilled.

✅ Step 4 — Gas Refill

We refill with the correct gas type — R22, R32 or R410A — based on your AC model. The right gas in the right amount makes all the difference.

✅ Step 5 — Final Performance Check

After refilling, we run your AC and check the cooling performance — so we leave only when everything is working perfectly.


Why choose our AC Gas Refil service in Demra,Dhaka

Demra's industrial environment creates a specific long-term threat to AC refrigerant circuits that our technicians address proactively during gas refill service here. The chemical compounds present in industrial air — particularly in areas near textile processing — can react with the outer surfaces of copper refrigerant pipes, creating pitting corrosion that eventually penetrates through to the refrigerant circuit. This type of leak develops slowly and may not be detectable by standard soap foam testing in its early stages. Our Demra gas refill technicians use nitrogen pressure hold testing as a standard additional step alongside soap foam testing, providing a more sensitive leak detection method appropriate for Demra's industrial air exposure environment. Refrigerant supply for Demra is maintained through Alam Refrigeration's supply point near Matuail, ensuring gas availability for same-day service across the area.

Our Other Services

◉ AC Basic Wash ◉ AC Foam Wash AC Jet Wash

◉ AC Master Servicing ◉ AC Installation

◉ AC Uninstall & Re-install ◉ AC Leak Repair

Pricing

Gas Type

1 Ton

1.5 Ton

2 Ton

R22

Starting from৳3,000

Starting from৳3,500

Starting from৳4,000

R32

Starting from৳2,500

Starting from৳3,000

Starting from৳3,500

R410

Starting from৳2,500  

Starting from৳3,000

Starting from৳3,500

R407

Starting from৳2,500

Starting from৳3,000

Starting from৳3,500

⚠️ If hanging or scaffolding is required, additional charge applies. Final price confirmed by technician on-site.


FAQ - Demra

▪️ How do I know if my AC needs gas refill?

If your AC runs but doesn't cool properly, takes too long to cool, or the outdoor unit runs non-stop — these are signs of low gas.

▪️ Why do you check for leaks before refilling?

If there is a leak and we just add gas, it will escape again within days or weeks. We fix the leak first so your gas lasts long — saving you money in the long run.

▪️ How long does gas stay after refilling?

If there is no leak, gas can last 2 to 5 years depending on usage and AC condition.

▪️ What gas type does my AC use?

It depends on your AC model. Our technician will check and use the correct type — R22 for older models, R32 or R410A for newer ones.

▪️ Is there a guarantee after gas refill?

Yes. 10-day guarantee. If gas drops again within 10 days due to a leak we missed, we come back and fix it for free.

Q: My Demra AC refrigerant pipe shows small pits on the outside — is this a leak risk? A: Surface pitting on copper refrigerant pipes in industrial environments is an early indicator of chemical corrosion that can eventually penetrate to the refrigerant circuit. We assess pitting depth and extent during our leak test and recommend protective treatment or pipe replacement for sections where pitting has reached an advanced stage — before a full leak develops. Q: Do you use nitrogen pressure testing as standard in Demra due to the industrial environment? A: Yes. For Demra gas refill calls, nitrogen pressure hold testing is our standard additional diagnostic step alongside soap foam testing. Industrial air corrosion creates leak types that develop too slowly for soap foam to detect reliably in early stages — nitrogen pressure testing provides the sensitivity needed. Q: How do you get to Demra and Matuail for gas refill service? A: Demra and Matuail are within our regular southern Dhaka service zone. Our Matuail supply point through Alam Refrigeration means our technician arrives with refrigerant ready. Same-day service is available for most Demra locations with morning bookings.

How to order

Tap the call button on top of the page

Go to Contact page, select your service, enter your name, phone number and address — done!

📞 Call: 01736092803

💬 WhatsApp: 01736092803

Reviews of AC Gas Refill — Leak Test First, Then Refill

5.0
0 ratings
5
4
3
2
1

No reviews yet. Be the first to review!

Leave a Review

Details

Gas refill service active across Demra main area, Matuail, Shyampur, Demra Bazar and surrounding areas. Refrigerant supply supported by Alam Refrigeration near Matuail. Nitrogen pressure hold testing standard for all Demra gas refill calls due to industrial corrosion environment. Same-day service available with morning bookings.